Endless Pendant Light

Size: L 100cm x H 89cm / L 39.4″ x H 35″ (Power: 48W)

Size: L 120cm x H 89cm / L 47.2″ x H 35″ (Power: 56W)

Size: L150cm x H 89cm / L 59″ x H 35″ (Power: 72W)

Inspired by the bold graphic aesthetics of post-modern architecture, the Endless Pendant Light is a striking statement piece. Its cylindrical sections and modular corner units allow for custom configurations, making it perfect for illuminating kitchen islands with a mid-century flair. Elevate your space with its architectural elegance.

• Material: Metal, Acrylic.
• Finishes: Gold & White, Black & White.
• Light Source: Integrated LED.
• Kelvin Range: Warm Light(3000K), Neutral Light(4000K), Cool Light(6000K).
• Rated Power: Max 40W, the fixture can operate safely.
• Rated Voltage: AC 110-240V.
• Moisture Resistance: IP 20 Damp-rated, Suitable for indoor use.
• Wiring: Hardwired; professional installation recommended.
• Control Method: Compatible with common wall switches (not included).
• Rod Length: The fixture includes total 19-inch height rod, but we can extend it to your preference—just let us know!
• Certification: UL, ETL, CE, SAA listed.

Let’s Get You Set Up!

Installing your new light fixture is easy! Just follow the simple steps below:

1. Turn Off the Power

Before you start, make sure to switch off the power from your circuit breaker or fuse box to keep things safe while installing.

2. Mark Your Mounting Holes

Hold the included mounting bracket at the height where you want your fixture to hang. Use a pencil to mark where the screws will go – and be sure everything is level!

3. Drill the Holes & Insert Anchors

Using a drill, make holes where you’ve marked, then insert the included anchors. These will help securely hold the screws.

4. Mount the Bracket

Align the holes of the bracket with the anchors in the wall. Insert the screws and tighten them using a screwdriver until the bracket is secure.

5. Connect the Wiring

Carefully remove the cover from the LED lamp to access the wiring. Connect the black wire (live/hot) and the green or bare copper wire (ground) to the existing circuit. Then, replace the cover and check everything is securely in place.

Quick Notes:

Dimming: Our fixtures with bulb sockets are dimmable. For any custom dimming needs, just reach out to us!

Hanging Height: The standard hanging height is 60” (1.5m), but we can customize it for you—just ask!

Sloped Ceilings: No worries, this fixture works with sloped or uneven ceilings.

How to Care for Your Fixture?

To keep your lamp looking great:

Protect the Finish: Avoid using abrasives or household cleaners on the surface. Simply dust with a soft, dry cloth to keep it shining.

Don’t Exceed Wattage: Make sure you’re using bulbs within the specified wattage to ensure safety and optimal performance.